2022-10-29
1. During the circulation of each process,
the selected coils must achieve good use efficiency. The coils should not be
overfilled, and the height of the wire core should not exceed the height of the
side plate of the coil.
2. It is necessary to mark the type and
length of the cable spool. There needs to be a channel around the cable spool,
which is convenient for inspection and needs to be stable.
3. It cannot be placed horizontally. When
the oil-filled type is placed outdoors, it is necessary to have an awning to
prevent mechanical damage and loss of accessories.
4. In order to prevent the terminal head
and the insulating accessories used by the central joint and the material from
being damp and deteriorated, it needs to be placed in a dry room.
5. In the process of each process of cable spool circulation, if it is not necessary, try to use all steel disks or plastic disks for product turnover. When the product is delivered, use the corresponding plate according to the customer's requirements.
https://www.cable-spool.com/plastic-cable-spool