2022-11-04
There are several aspects that must be paid
attention to in the application of the cable spool: Since the cable spool is
equipped with wheels, it must be fixed well when bringing it into the car, so
as not to damage other special tools in the car. Car caused by a rollover; in
this case, be sure to loosen all wires from the cable spool to avoid damage to
the vortex cable.
1. The 2 waist pin holes on the cable spool
are not used. For a long time, only the top cone can push the hole shaft to
rotate, which makes the hole shaft part bear excessive force. After prolonged
use, the fastening grooves in the bore shaft can break. Open, this will loosen
the iron coupling and endanger the coiled wire. It is recommended to solder
pins on the device and use the 2 pin holes of the release board, the actual
effect is very significant.
2. Please try to avoid the emergency brake
pedal frequency caused by the emergency brake pedal.
3. For brutal loading and unloading or
overweight applications, please minimize such practical operations.
Summary: During the use of the cable spool,
we try to minimize the operations that cause too much damage to the cable
spool, which can effectively extend the service life of the cable spool.