2023-01-29
There are only 3 types of 400 rubber
shafts, but there are many styles due to the different appearances of the
manufacturers, but they have no effect on the use of the product (only the
materials and structural processes used to affect the quality of the reel.).
The first type: one-piece plate thickness
20MM
400 integrated wire reel: The surface of
the disk and the cover are injection molded at one time. The dynamic balance is
more stable than that of the assembled type. The density of the ribs on the surface
of the disk is denser than that of the assembled type, but the load bearing
will be reduced. Large wires), braiding machines and other wires and equipment.
The second type: Assembled disk surface
thickness 16MM
The thickness of the 400 assembly type disk
surface is 16MM: it is composed of a disk surface and a cylinder, and fixed by
four screws, which improves the load-bearing capacity of the wire reel. The
height can also be changed according to the requirements of different
equipment, but the dynamic balance is not as good as the integrated wire reel.
It is often used in winding machines, braiding machines, wires, core wires,
data and other equipment and wires.
The third type: Assembled plate thickness
20MM
The thickness of the 400 assembly type disk
surface is 20MM: on the basis of the thickness of the 400 assembly type disk
surface thickness of 16MM, the thickness of the disk surface is increased to
20MM, and the tension and load bearing of the wire reel are improved. In the
use of products, the winding speed can be greatly increased, and the cable
arrangement effect is better. Neat and longer service life.
https://www.cable-spool.com/plastic-cable-spool