2023-02-06
The production and processing coordination
of wire reels must be scientific, strict and meticulous, and the workers must
be meticulous in implementing the production process requirements. Difficulties
in any link will all affect the smooth production process. Wire reel production
and processing production process and mechanical equipment rational layout of
various mechanical equipment in the production line as far as possible
according to the production process required by the product and reasonable
sewage treatment, so that the production and processing at each stage.
The structure to be fully considered in the
coil design:
1. Plastic shrinkage rate and various
factors that damage the product model, such as mold manufacturing and
installation errors, mold damage, etc. In addition, the manufacturing process
of the molding machine and the matching of the basic structural parameters
should be fully considered when designing the molded shell and cable reel.
2. Analytical surface, that is, the contact
surface where the die and the mold base cooperate with each other when the mold
is closed. The selection of its position and method is influenced by factors
such as product shape and appearance, molding method, post-processing
technology, mold type and structure, demolding method and molding structure.
3. Mold degree, that is, card avoidance,
positioning, spring leaf, etc. The system is related to the product mold and
service life. Depending on the stamping mold, different positioning methods are
selected, and the control depends on manufacturing. The positioning of the
hollow floor is mainly fully considered.
4. Concrete pouring system, that is, the
feeding channel from the nozzle of the plastic machine to the middle of the
cavity, including the fashion channel, the glue inlet and the cold material
hole.