How to pay attention to the details of the reel during shipment?

We know that there will be more or less problems in the whole process of transportation of winding reels. Under certain circumstances, this kind of problem will cause unstable quality. In this situation, under certain circumstances, especially the transportation During the whole process, we must pay attention that such problems cannot occur. Flat lay loading of cable reels is not permitted. Lying flat will loosen the cable coil, and it is also very easy to damage the cable and the cable coil. Wires and cables are generally coiled on cable reels for transportation, storage, and laying and release. Long length cables under 30m can also be stacked into a social circle according to the minimum bending radius not less than the allowable cable, and bundled in four places at least for transportation. Cables, mine cables used to be mostly made of wood, but now they are more of steel frame structure. Because the steel frame structure is relatively firm, it is not easy to be damaged, which is very beneficial to the maintenance of the cable, and this type of cable reel can It can be reused many times and is more economical than wooden cable reels. In the whole process of transportation, the most important thing is to maintain the cables, and it is not possible to cause problems with only the cables.

In the whole process of transporting and loading and unloading the cable reel, the important problem is not to damage the cable, and not to damage the insulation layer of the cable. Although it is a well-known problem, it still occurs frequently and should be given sufficient attention.

A crane is generally used to install the cable reel. When the cable reel is transported on the vehicle, the foot massage sofa should be placed upright and firmly fixed. mess up. The cable should be inspected before transportation. The cable should be intact and the cable end should be tightly sealed. The inner and outer edges of the cable and the oil pipeline between the oil-type cable and the working pressure tank should be firmly fixed on the plate. Prevent it from being shaken and loosened during the whole process of transportation; the oil gate valve provided on the working pressure tank should be open, and the working pressure indicates that everything is normal; the outside of the cable should be well protected to prevent damage from foreign objects. If a problem is found, it should be solved before shipment can be shipped.