- English
Español
Português
русский
Français
日本語
Deutsch
tiếng Việt
Italiano
Nederlands
ภาษาไทย
Polski
한국어
Svenska
magyar
Malay
বাংলা ভাষার
Dansk
Suomi
हिन्दी
Pilipino
Türkçe
Gaeilge
العربية
Indonesia
Norsk
تمل
český
ελληνικά
український
Javanese
فارسی
தமிழ்
తెలుగు
नेपाली
Burmese
български
ລາວ
Latine
Қазақша
Euskal
Azərbaycan
Slovenský jazyk
Македонски
Lietuvos
Eesti Keel
Română
Slovenski
मराठी
Srpski језик
Where can I customize the cable spool?
2022-11-23
A good cable reel must meet the following criteria, first of all, it must have better resistance to external forces. Such materials are basically used in different environments in many cases, so in order to meet everyone's needs, In many cases, this is what everyone needs to pay attention to, and the second point is the security settings, which must be able to meet everyone's security needs, so there must be relatively good user-friendly security devices such as dedicated line cards and locking functions. , can reduce the potential safety hazards to a minimum, and the last point is that the types of the entire cable reel must be complete, and can be used in different cabins and in order to better play its role.
The sealing surface of the cable reel should be kept flat and clean at all times, so that it can be installed more firmly during installation. If there is oil or rust, it must be cleaned.
Cable reel failure and causes:
1. Leakage. Causes: Moisture or water; exposed wires at the end of the plug; damage; incorrect protective earth connection.
2. The circuit is blocked. Causes: The socket socket is too loose, and the plug is not in contact; the screw at the connection point of the socket wire is dropped; the power lead is disconnected; the plug crimping screw is loose or the solder joint is disengaged, and the wire is forced to make the wire end fall off.
3. Poor contact. Causes: The plug crimping screw is loose or the solder joint is weak; the power cord at the root of the plug is broken inside; the screw at the socket wire connection is loose or the wire is corroded; the plug socket is too loose; the socket quality is poor.
4. The cause of the short circuit: the wire head is exposed too long or has burrs in the socket or plug; the wire is separated from the crimping screw of the socket or plug; the two sockets of the socket are too close to each other and touch the wire.
The sealing surface of the cable reel should be kept flat and clean at all times, so that it can be installed more firmly during installation. If there is oil or rust, it must be cleaned.
Cable reel failure and causes:
1. Leakage. Causes: Moisture or water; exposed wires at the end of the plug; damage; incorrect protective earth connection.
2. The circuit is blocked. Causes: The socket socket is too loose, and the plug is not in contact; the screw at the connection point of the socket wire is dropped; the power lead is disconnected; the plug crimping screw is loose or the solder joint is disengaged, and the wire is forced to make the wire end fall off.
3. Poor contact. Causes: The plug crimping screw is loose or the solder joint is weak; the power cord at the root of the plug is broken inside; the screw at the socket wire connection is loose or the wire is corroded; the plug socket is too loose; the socket quality is poor.
4. The cause of the short circuit: the wire head is exposed too long or has burrs in the socket or plug; the wire is separated from the crimping screw of the socket or plug; the two sockets of the socket are too close to each other and touch the wire.
5. Damaged. Causes: The rubber cover is damaged by external impact; the socket copper sheet or connecting column is burned due to short circuit; the plug and socket are aging due to long-term use.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.
Privacy Policy